Intelligent paper sizing allows you to automatically readjust the fields on the labels.

  1. Make sure that the paper and the ink roll are correctly loaded in the printer and that the printer cover is closed. 

  2. Press the On/Off button on the printer to turn it on.

  3. When the printer status light is green and not flashing (located above the PAUSE button), press and hold the PAUSE and CANCEL buttons at the same time for two seconds, then release. 

  4. The printer evaluates a few labels and sets the paper detection levels.

  5. When the printer stops, the status light will glow green and not blink. The printer is now calibrated.